G-type Wired Handheld Zinc Oxide Arrester Live Tester



G-type Wired Handheld Zinc Oxide Arrester Live Tester



I. Instrument Features




  1. It can measure resistive current either by direct testing method or by indirect testing using third harmonic.

  2. Three-phase voltage and three-phase current are collected and displayed simultaneously, achieving true three-phase simultaneous measurement.

  3. The reference voltage signal can be obtained via 3PT, 1PT, no PT, or induction methods.

  4. The instrument is equipped with a rechargeable battery, calendar clock, and micro printer, and can store 256 sets of measurement data.

  5. For convenient analysis of resistive current, both side-phase compensation prohibition and allowance are available.

  6. To save printing paper, both waveform printing allowance and prohibition are available.



Main Technical Parameters



Total current measurement range: 0~10mA RMS



Accuracy: ±(reading×5%+5uA)



Resistive current fundamental measurement accuracy (wired, excluding inter-phase interference): ±(reading×5%+5uA)



Current harmonic measurement accuracy: ±(reading×10%+10uA)



Current channel input resistance: ≤2Ω



Reference voltage input range: 25V~250V RMS



Accuracy: ±(reading×5%+0.5V)



Voltage harmonic measurement accuracy: ±(reading×10%)



Reference voltage channel input resistance: ≥1800kΩ



Battery continuous working time: more than 36 hours



Battery charging time: more than 5 hours



AC charger: AC 220V ±10%, 50Hz ±1%