Three-level Undertaking Power Facilities/120KV/2mA DC High Voltage Generator
1. One main unit of high-voltage voltage doubler body (with aluminum alloy box);
2. One control box;
3. One power cord;
4. One high-frequency output multi-core cable;
5. One factory test report of the product;
6. One output wire;
7. One instruction manual for the product;
8. Two fuse tubes.
120KV/2mA DC High Voltage Generator Performance Features:
Digital display of output voltage and current;
Can switch to 75% voltage output at any time;
Has overvoltage and overcurrent protection setting functions, and can display the set voltage and current values;
Can smoothly adjust output voltage over the full range;
Perfect protection functions to ensure that the potentiometer must be adjusted to zero before each voltage boost;
Discharging with a discharge rod does not affect the magnitude of the output voltage;
Has output voltage timing function;
Has audible and visual alarm functions for overvoltage and overcurrent protection;
Can work at full load for 30 minutes.
Technical Parameters:
Working power supply: voltage 220V±22V
Frequency: 50Hz or 60Hz;
Display accuracy: ±1%;
Ripple coefficient: ≤1%;
Working mode: intermittent use, each time not exceeding 30 minutes;
Product Applications
Mainly applicable to power maintenance departments, power departments of industrial, mining, metallurgical, steel and other enterprises for DC withstand voltage tests on high-voltage electrical equipment such as zinc oxide arresters, power cables, transformers, generators, and high-voltage switches.
It is specially used to detect the electrical insulation strength and leakage current of power devices. It is newly researched, designed, and manufactured according to the requirements of the Chinese industry standard ZBF 24003-90 "General Technical Conditions for Portable DC High Voltage Generators". It is a new era product. The intelligent DC high voltage generator has multiple protection functions, such as: low-voltage overcurrent, low-voltage overvoltage, high-voltage overcurrent, high-voltage overvoltage, zero position protection, and non-grounding protection. The fault sampling uses a dedicated sensor with nanosecond-level action time, and the optical isolation element is also nanosecond-level. The action time can completely cut off the DC main circuit within 10 microseconds, thereby maximizing the protection of the instrument from damage.
