Analysis of Technical Parameters of YHX-300G Remote Wireless High-Voltage Phase Verifier
The YHX-300G remote wireless high-voltage phase verifier adopts GPS timing technology and wireless transmission technology, used for long-distance phase verification, short-distance phase verification, and phase verification at switchgear power-taking induction points. It also has functions of high-voltage live detection, phase sequence verification, and grid frequency measurement. The instrument is suitable for live phase verification operations on 5V to 500KV transmission lines.
The YHX-300G remote wireless high-voltage phase verifier uses GPS satellite timing technology to obtain unified time anywhere in the world, and can simultaneously measure the phase difference between two wires in any location. This solves the distance limitation of traditional wireless phase verifiers, which require operation within 300 meters.
Working Principle
Long-distance phase verification - Measurement mode: Master units A and B are timed by GPS, and at the same GPS time (nanosecond level) start receiving phase and frequency information from transmitter Y, calculating the phase difference based on the phase values of A and B.
Long-distance phase verification - Timing measurement mode: Master units A and B are pre-timed by GPS, then start their internal clocks, and at the same timemicrosecond level start receiving phase and frequency information from transmitter Y, calculating the phase difference based on the phase values of A and B.
Short-distance phase verification: One master unit measures and receives signals from transmitter X and transmitter Y, calculating the phase difference between the two lines.
Transmitter principle: Collects phase and frequency information of live lines, encodes the information, and sends it to the receiving master unit via radio waves.
Product Aliases
Phase verifier, phase verification instrument, phase verification device, wireless phase verifier, high-voltage phase verifier, high-voltage phase verification instrument, voice phase verifier, voice phase verification instrument, wireless phase verifier, wireless phase verification instrument, digital phase verifier, digital phase verification instrument, phase identifier, high-voltage phase identifier, 10KV high-voltage phase verification instrument, digital high-voltage wireless phase verification instrument, remote phase verification instrument, phase verification instrument manufacturer, ultra-long-distance wireless phase verification instrument, ultra-long-distance remote wireless high-voltage phase verification instrument, satellite-timed remote wireless phase verification instrument, satellite-timed remote phase verification device, satellite-timed remote wireless phase verifier, satellite-timed remote high-voltage phase verifier, satellite-timed remote high-voltage phase verification instrument, satellite-timed remote voice phase verifier (instrument), satellite-timed remote wireless phase verification instrument
Product Parameters
1. Phase difference accuracy:
Short-distance phase verification: error ≤3°
Long-distance phase verification - mode: error ≤3°
Long-distance phase verification - timing mode: error ≤6°
2. Frequency accuracy: ±0.1Hz.
3. The wireless transmission distance between the transmitter and the receiving master unit is greater than 100 meters.
4. The remote phase verification distance between master units A and B via GPS satellite timing is ≥500km.
5. Result judgment adopts A-level standard. Phase difference ≥30° is out-of-phase; phase difference <30° is in-phase.< span="">
6. The instrument can continue to work for 30 minutes without GPS signal.
7. The instrument achieves cross-voltage-level measurement, and one instrument can measure lines of various voltage levels.
8. It has the functions of high-voltage live detection and phase sequence verification.
9. It can be used for phase verification of switchgear live display.
10. Data storage capacity is 800 groups, which can be viewed and deleted individually.
11. The standard insulating rod length is 3 meters, and the insulating rod is suitable for voltage levels ≤220KV.
12. Leakage current during high-voltage measurement is <10ua.< span="">
13. The working power consumption of the transmitter is <0.1w, and the working power consumption of the receiving master unit is <0.3w.< span="">
14. Both transmitters and receivers are built-in rechargeable lithium batteries. The master unit battery capacity is about 2200mAH, and the transmitter battery capacity is about 350mAH.
15. Working environment: -35℃ --- +45℃, humidity ≤95%RH.
16. Storage environment: -40℃ --- +55℃, humidity ≤95%RH.
17. Total weight: about 5Kg*2 units.
18. Instrument packaging dimensions: length 1775px*width 650px*height 275px*2 units.
