Transformer Ratio Bridge Tester Product Description
In the production process of power transformer semi-finished and finished products, before new transformers are put into operation, and during the operation of transformers in the power system, according to the preventive test procedures of the Ministry of Electric Power, it is required to regularly test the turns ratio or voltage ratio of operating transformers. The traditional ratio bridge is cumbersome to operate, the readings are not intuitive, and necessary conversions are required. The test result only provides data for one phase ratio.
Transformer Ratio Bridge Tester Operating Method:
◇This instrument has three buttons: "Select", "Confirm", and "Reset".
1. Resistance Measurement
After powering on or pressing the reset button, the instrument enters the initial state (1). At this time, the cursor pointer points to "Resistance". Press the "Confirm" button directly to enter state (2), displaying the changing charging current and measurement time. After charging is completed, it automatically enters state (3), displaying the resistance value, measurement current, and measurement time. Each time the "Confirm" button is pressed, a measurement result is stored (models with a printer also print the measurement result). Press the "Reset" button to exit resistance measurement and enter state (4), displaying the discharge current. After discharge ends, it automatically returns to the initial state (1), completing one resistance measurement.
2. Number Setting
Entering the device number helps in searching memory data. In the initial state (1), point the cursor to "Settings" and press the "Confirm" button to enter state (5), displaying the current device number. Press the "Confirm" button again to enter state (6), prompting to enter a new device number. At this time, pressing the "Select" button cycles the current input digit from '0' to '9', then from 'A' to 'Z'. After finding the desired number or letter, press the "Confirm" button to input that digit. Then use the same method to input the next digit. After entering all six digits, return to state (5), displaying the newly entered device number. Press the "Reset" button to return to the initial state (1).
Performance Features
1. Wide test range, up to 10000.
2. Fast test speed, completes three-phase test in 7 seconds.
3. Z-connection transformer testing.
4. Has blind test ratio and group test functions.
5. Non-volatile clock and date display, data storage function.
6. Protection function for reverse connection of high and low voltage.
7. Protection function for transformer short circuit and inter-turn short circuit.
8. Thermal printer output function, fast and silent.
9. Small size, light weight.
Technical Specifications
